Steel Pipe Supplier in Coimbatore | MS Pipes

Q: What types of steel pipes does Magnus Steels supply in Coimbatore?

We supply three primary hollow sections: CHS (Circular Hollow Section) – 21.3 mm to 356.6 mm, Thickness: 1–10 mm. RHS (Rectangular Hollow Section) – 26×13 mm to 400×200 mm, Thickness: 1–12 mm. SHS (Square Hollow Section) – 12×12 mm to 300×300 mm, Thickness: 1–12 mm. All pipe types are suitable for construction, industrial fabrication, structural framing, and pipeline applications.

Q: What is the price of MS pipes in Coimbatore?

MS pipe prices in Coimbatore vary based on pipe type (CHS, RHS, SHS), size and wall thickness, current steel market rates, and order quantity (retail vs. bulk). For an updated quote, contact Magnus Steels at +91 80155 27611 or email magnussteelscbe@gmail.com. Steel prices change regularly, so direct pricing is recommended.

Q: Do you supply MS pipes in small quantities or only bulk orders?

We cater to both. Whether you need a small batch for a fabrication or workshop job, or large quantities for a construction project or industrial setup — Magnus Steels can fulfill your requirement. Share your pipe type, size, and quantity and we'll sort out the rest.

Q: Are the MS pipes supplied by Magnus Steels IS standard certified?

Yes. All steel pipes supplied by Magnus Steels meet relevant IS standard specifications. We source from reputed mills to ensure consistent grade, dimensional accuracy, and reliable mechanical performance. Quality stays uniform across every batch we dispatch.

Q: Which areas near Coimbatore do you serve?

We primarily serve Coimbatore and surrounding areas including Tirupur, Erode, Pollachi, and nearby industrial zones. Contact us at +91 80155 27611 to confirm delivery to your specific location.

Q: What is the difference between CHS, RHS, and SHS steel pipes?

CHS (Circular) – Round cross-section. Best for fluid and gas transport, columns, and round structural frames. RHS (Rectangular) – Unequal width and height. Ideal for structural beams, gates, and frames where different spans are needed. SHS (Square) – Equal sides on all four faces. Popular for furniture, machinery supports, and modular fabrication work. The right choice depends on your load conditions, jointing method, and application. Our team can help you decide.

MS Pipe Grades Available

MS pipes are available in different strength grades depending on load and application:

◉ YST 210 – Light fabrication and general use

◉ YST 240 – Basic structural applications

◉ YST 310 – Medium strength fabrication

◉ YST 355 – Construction frameworks

◉ YST 450 – Heavy structural work

◉ YST 500 – Industrial applications

◉ YST 550 – High load structures

◉ YST 600 – High pressure usage

◉ YST 650 – Engineering-specific applications

◉ YST 700 – Ultra high strength structures

ⓘ Higher grade means higher tensile strength and load capacity.

Looking for the Right MS Pipe Grade for Your Project?

📞 CALL US →

MS Steel Pipe Weight Chart

Use this reference chart to plan your material procurement, estimate logistics weight, and calculate project costs accurately. Weights (kg/m) are listed by Outer Diameter (OD), Nominal Bore (NB), and wall thickness — calculated using a mild steel density of 7.85 g/cm³.

How to use this chart: Find your pipe's OD and NB in the first two columns. Then select the wall thickness column that matches your requirement. The value shown is the weight per metre (kg/m). Multiply by your required length to get total weight. Example: a 48.3mm (40NB) pipe with 2.90mm wall thickness weighs 3.17 kg/m — for a 6m length: 3.17 × 6 = 19.02 kg.

OD (mm)	NB	1.20 mm	1.40 mm	1.60 mm	2.00 mm	2.60 mm	2.90 mm	4.00 mm	5.00 mm	6.00 mm	8.00 mm
Outer Dia / Nom. Bore		Weight per Metre (kg/m) by Wall Thickness
21.3	15NB	3.57	4.12	4.67	5.71	7.19	7.90	-	-	-	-
26.9	20NB	4.56	5.28	5.99	7.37	9.35	10.30	-	-	-	-
33.7	25NB	5.77	6.69	7.60	9.38	11.96	13.22	17.58	-	-	-
42.4	32NB	7.32	8.49	9.66	11.96	15.31	16.95	22.73	-	-	-
48.3 Popular	40NB	8.36	9.72	11.06	13.70	17.58	19.48	26.22	-	-	-
60.3 Popular	50NB	10.49	12.20	13.90	17.25	22.20	24.63	33.32	-	-	-
76.1	65NB	13.30	15.47	17.64	21.93	28.28	31.41	42.67	-	-	-
88.9 Popular	80NB	15.57	18.13	20.67	25.72	33.20	36.90	50.25	62.00	-	-
114.3 Popular	100NB	20.08	23.39	26.68	33.23	42.97	47.80	65.28	80.86	-	-
139.7	125NB	21.59	28.65	32.69	40.75	52.74	58.70	80.31	99.65	-	-
165.1	150NB	29.10	33.91	38.71	48.26	62.51	69.60	95.35	118.44	-	-
219.1	200NB	-	-	-	-	-	127.31	158.40	189.19	249.89	-
272.1	250NB	-	-	-	-	-	158.68	197.61	236.25	312.63	-
323.9	300NB	-	-	-	-	-	189.34	235.94	282.24	373.95	-
355.6	350NB	-	-	-	-	-	-	208.10	259.39	310.38	411.47
406.04	400NB	-	-	-	-	-	-	237.96	296.71	355.16	471.18
* Weight (kg/m) = π × (OD − t) × t × 0.00785, where OD = outer diameter (mm), t = wall thickness (mm). Values are approximate ±2% based on manufacturing tolerances. "-" indicates this wall thickness is not standard for that OD/NB size.

Weight Calculation Formula

                        W (kg/m) = π × (OD − t) × t × 0.00785
                    

Where OD = outer diameter (mm) | t = wall thickness (mm)
Example: 88.9mm OD, 4.00mm wall →
π × (88.9 − 4) × 4 × 0.00785 = 8.38 kg/m
For a 6m pipe: 8.38 × 6 = 50.25 kg

Quick Pipe Weight Calculator

OD / NB Size

Wall Thk (mm)

Length (m)

Number of Pipes

MS Hollow Section (RHS & SHS) Weight Chart

Use this reference chart to plan material procurement, estimate logistics weight, and calculate project costs accurately for Rectangular Hollow Sections (RHS) and Square Hollow Sections (SHS). Weights (kg/m) are listed by section size and wall thickness — calculated using mild steel density of 7.85 g/cm³.

How to use this chart: Find your section's Rectangle (RHS) or Square (SHS) size in the first two columns. Then select the wall thickness column that matches your requirement. The value shown is the weight per metre (kg/m). Multiply by your required length to get total weight. Example: a 50×25 RHS / 40×40 SHS pipe with 2.00mm wall thickness weighs 3.91 kg/m — for a 6m length: 3.91 × 6 = 23.46 kg. "-" means that wall thickness is not standard for that section size.

Rectangle (RHS)	Square (SHS)	1.20 mm	1.40 mm	1.60 mm	2.00 mm	2.60 mm	2.90 mm	4.00 mm	5.00 mm	6.00 mm	8.00 mm
Section Size		Weight per Metre (kg/m) by Wall Thickness
-	12×12	2.50	2.86	3.22	3.91	-	-	-	-	-	-
-	15×15	3.16	3.65	4.13	5.04	-	-	-	-	-	-
-	19×19	4.08	4.72	5.35	6.57	8.31	9.16	-	-	-	-
-	25×25	5.44	6.30	7.16	8.83	11.24	12.41	16.47	-	-	-
40×20	30×30	6.57	7.62	8.66	10.71	13.69	15.14	20.24	-	-	-
-	32×32	7.02	8.15	9.27	11.46	14.67	16.24	21.74	-	-	-
50×25 Popular	38×38	8.38	9.73	11.07	13.72	17.61	19.51	26.27	-	-	-
-	40×40 Popular	9.20	10.23	12.00	14.50	18.00	20.50	28.00	30.95	35.52	-
60×40 Popular	50×50 Popular	11.09	12.89	14.69	18.24	23.49	26.07	35.3	46.5	46.93	-
80×40	60×60	13.35	15.53	17.7	22.01	28.38	31.53	42.84	52.67	58.13	-
96×48	72×72	16.06	18.7	21.32	26.53	34.26	38.09	51.88	63.94	71.17	-
-	80×80 Popular	-	-	-	29.55	38.18	42.45	57.91	71.46	80.74	-
100×50 Popular	-	-	-	22.2	27.8	35.7	39.75	54	66.8	75.09	-
122×61	91.5×91.5	-	-	-	-	43.81	48.74	66.57	82.47	97.83	-
-	100×100 Popular	-	-	-	-	47.97	53.38	72.97	90.48	107.41	140.08
-	125×125	-	-	-	-	-	-	-	69.13	91.58	113.74	135.6
145×82	113×113	-	-	-	-	-	54.58	60.75	81.15	103.19	122.63	160
172×92	132×132	-	-	-	-	-	-	70.84	97.06	120.59	143.49	188.96
200×100 Popular	150×150 Popular	-	-	-	-	-	-	80.69	110.65	137.57	163.79	216.02
240×120	180×180	-	-	-	-	-	-	-	132.92	165.41	197.61	261.11
250×150	200×200	-	-	-	-	-	-	-	147.96	184.21	220	291.18
-	220×220	-	-	-	-	-	-	-	161.48	200.51	238.99	314.35
300×200	250×250	-	-	-	-	-	-	-	184.09	228.77	272.91	359.57
400×200	300×300	-	-	-	-	-	-	-	221.77	275.87	329.43	434.93
* Weight (kg/m) = 2 × (B + H − 2t) × t × 0.00785, where B = width (mm), H = height (mm), t = wall thickness (mm). For SHS: B = H. Values are approximate ±2% based on manufacturing tolerances. "-" indicates this wall thickness is not standard for that section size.

Hollow Section Weight Formula

                        W (kg/m) = 2 × (B + H − 2t) × t × 0.00785
                    

Where B = width (mm) | H = height (mm) | t = wall thickness (mm)
For SHS: B = H (square, equal sides)
Example: 100×50 RHS, 4mm wall →
2 × (100 + 50 − 8) × 4 × 0.00785 = 11.15 kg/m
For a 6m length: 11.15 × 6 = 66.9 kg

Quick Hollow Section Weight Calculator

Width B (mm)

Height H (mm)

Wall Thk (mm)

Length (m)

No. of Pieces

Why Choose Magnus Steels for Steel Pipes in Coimbatore?

Magnus Steels is a trusted steel pipe supplier in Coimbatore, delivering IS standard-compliant MS pipes across CHS, RHS, and SHS sections. Our consistent quality, ready stock, and responsive service make us the preferred choice for contractors, fabricators, and industrial buyers across Coimbatore and Tamil Nadu.

ISI Standard Verified Quality

All MS pipes we supply meet relevant IS specifications. We source only from reputed mills to ensure consistent grade, dimensional tolerance, and surface finish across every batch.

CHS, RHS & SHS – Full Range in Stock

We maintain ready inventory across circular, rectangular, and square hollow sections in multiple sizes and thicknesses — so your project doesn't wait for material to arrive.

Competitive & Transparent Pricing

We offer market-aligned pricing with no hidden charges. Whether it's a small retail buy or a bulk order for a large site — you get fair rates every time.

Reliable & On-Time Delivery

We serve Coimbatore and surrounding areas with prompt dispatch. Construction timelines are tight — we make sure material delays don't become your problem.

Flexible Order Quantities

Small batch for a shop job or large quantity for a construction site — we cater to both. No minimum order pressure; just tell us what you need.

Expert Guidance Before You Buy

Not sure whether CHS, RHS, or SHS fits your application? Our team helps you choose the right pipe section and thickness before you place the order — saving time and cost.

Frequently Asked Questions About MS Pipes in Coimbatore

What types of steel pipes does Magnus Steels supply in Coimbatore?

What is the price of MS pipes in Coimbatore?

Do you supply MS pipes in small quantities or only bulk orders?

Are the MS pipes supplied by Magnus Steels IS standard certified?

Which areas near Coimbatore do you serve?

What is the difference between CHS, RHS, and SHS steel pipes?

MS steel pipe supplier in Coimbatore – Magnus Steels

Your Trusted Steel Pipe Supplier in Coimbatore

Looking for quality MS pipes in Coimbatore? Magnus Steels is a reliable supplier of CHS, RHS, and SHS steel pipes — IS standard compliant, consistently stocked, and delivered on time. Whether it's construction, industrial, or fabrication work, we supply the right pipe in the right size for your project. Builders, contractors, and engineers across Coimbatore and Tamil Nadu count on us for dependable material and straightforward service.

Get a Free Quote Today